How in the heck do i have Knock?? look at my log

[zbrown]

Alright. this is on a stock block 4.8 with only a mild cam and c6 manifolds with short dumps and no mufflers (facing forward and down...

60lbs injectors, edelbrock manfold, ect.... going to be boosted, trying to get it tuned decent on motor first

Running 2 bar SD... on a Pro Interface

I have no idea how i am getting so much knock retard.......

fuel is sufficient, (logging AEM O2 so that can be seen)

not much timming at all....

I just don't know, I can feel it hesitating ect. when it starts pulling timming

My only thought is maybe the exhaust is too loud and is interfering?? is that possible?

anyway.... a quick 1-3 WOT log.... please let me know your thoughts

and this is with the system locked into open loop so i can tune via my wideband

thanks

zac

[zbrown]

here is my config if needed

[WS6FirebirdTA00]

your AFR is going to 13.6, way too lean.

Your IAT sensor is also dead.

That also seems like very low timing to be running.Once you fix your fueling issues, you may be able to run more.

Without a tune we can't see your knock sensor settings either.