Results 1 to 4 of 4

Thread: tune please for sts gt67 ls1 m6 98 trans am

  1. #1
    Tuner
    Join Date
    Dec 2006
    Location
    Calgary , Alberta, Canada
    Posts
    61

    check my tune please for sts gt67 ls1 m6 98 trans am

    Hey guys I was wondering if anyone had a tune I could use as a base for my turbo install. I am running a cat delete kit from Mac, ls6 intake with racetronix 42lb injectors and 255 fuel pump. I am going to run 8psi boost and 91 octane.
    Thanks,Chris.
    [email protected]
    here is what I have so far and here is a log as well any suggestions?
    Last edited by spaz; 06-11-2008 at 11:39 PM.

  2. #2
    Tuner
    Join Date
    Dec 2006
    Location
    Calgary , Alberta, Canada
    Posts
    61
    bumpage

  3. #3
    Tuner
    Join Date
    Dec 2006
    Location
    Calgary , Alberta, Canada
    Posts
    61
    any tips?
    should I adjust the Ifr tables The ltft's are high.

  4. #4
    Senior Tuner Russ K's Avatar
    Join Date
    Dec 2005
    Location
    Regina, Sask.
    Posts
    4,214
    I set up your IFR table for the 42# injectors (to lower the LTFT's) and the open loop table. You need to log commanded AFR & Maf Hz so your AFR error histogram will work. Since the 1998 pcm only supports 24 bytes, you will need to delete unnecessary pids such as Maf g/sec, fuel trim cell, and O2 voltage.

    Also set your PE to 11.5, or 12.0 if your intercooled. And install a 160*F stat & lower the fan temps. I would install 2 heat range colder than stock spark plugs.

    Russ Kemp