NGK or LM1
NGK or LM1
Sulski Performance Tuning
2000 WS6 M6 - LS6 (long block, refreshed top end), 10.8:1 CR, 90 mm ported FAST, Exo-Skel, 227/232 cam, QTP HVMC, EWP, GMMG, 9" w/4.11s
2018 Sierra SLT 5.3L A8 - Airaid intake tube, GM Borla catback, L86 Intake/Ported TB
Innovative does seem to have their share of QA issues. The first LM-1 I received was DOA (outputs were shot -- very common problem with these units). The replacement unit has worked flawlessly in the shop since (about two years). I don't log with it (it's wired up to the dyno software), so wouldn't know about memory issues. The exhaust clamp is crap though.Originally Posted by WS6FirebirdTA00
If I had it to do over again, I probably would go with another unit. But once you get one that works, they work fine. And the replacement sensor is standard-issue, $50 at any auto parts store.
Last edited by brianko; 07-06-2008 at 06:59 PM.
ExaTorq Tuning and Performance (Dallas, TX)
I really have had no issues with the LM1 other than it keeping the memory.
Sulski Performance Tuning
2000 WS6 M6 - LS6 (long block, refreshed top end), 10.8:1 CR, 90 mm ported FAST, Exo-Skel, 227/232 cam, QTP HVMC, EWP, GMMG, 9" w/4.11s
2018 Sierra SLT 5.3L A8 - Airaid intake tube, GM Borla catback, L86 Intake/Ported TB
Hello:
I come from Taiwan
I'm looking for fjo wideband Handbook (PDF document) and software (PC and PDA)
Do you have it? you can send e-mail to me?([email protected])
Thank you ~
Hello:
I come from Taiwan
I'm looking for fjo wideband Handbook (PDF document) and software (PC and PDA)
Do you have it? you can send e-mail to me?([email protected])
Thank you ~
Post a log and tune if you want help
VCM Suite V3+ GETTING STARTED THREADS / HOW TO's
Tuner by night
CPX Tuning
2005 Corvette, M6
ECS 1500 Supercharger
AlkyControl Meth, Monster LT1-S Twin, NT05R's
ID1000's, 220/240, .598/.598, 118 from Cam Motion
2007 Escalade, A6
Stock
I use an AEM X-Series 30-0300... it's my first WBO2 as well as my first foray into tuning. I was very happy with how easy the WB was to hook up, as I had read long articles for some of the others. The 30-0300 was easy as cake.. Power +, power -, data +, data -, and then plug it all in. Done.
Maybe I can try fjo connect AEM software