any plans on supporting this engine 280hp is not enough
any plans on supporting this engine 280hp is not enough
Is this not it?
06-08Saab 9-3 2.8
http://www.hptuners.com/products/vcmsuite_vehicles.php
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
wasnt sure If that included the 2.8L turbo 280Hp engine thanks for the point out, will try to read the pcmOriginally Posted by Bill@HPTuners
Bill,
I just sent a customer's 2008 Saab 2.8 file to support to look at. He has tried to read it several times and got the same checksum error each time. He was not presented with an option to fix the file, just to contact support if the error continued.
I have tuned 2006 and 2007 2.8 Saabs successfully; this is the first 2008 Turbo-X variant however. Perhaps there is something different with this OS.
Thanks,
VTuner
Yeah im going to have our head engineer look over the file and have also requested some info from the customer regarding the pcm & such. Hopefully we can figure out why its not reading the file out properly.
-Bill
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
I had the same resultOriginally Posted by Bill@HPTuners
I think the AWD system has a lot to do with the pcm being different, the haldex system must use some things in the pcm to work, I would suspect that they might have even used a differnt pcm.Originally Posted by VTuner
I have examined the VCM in my vehicle, as well as the one in my mother's FWD 2008 Aero.
Many of the numbers are the same, and in particular, the Service number.
I'm not a programmer or technician, so I don't really know much more than that.
Looks like it should be something we can fix without too much effort.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Bill, any updates? will there be tranny options available for the 6spd auto?Originally Posted by Bill@HPTuners
Should know more in the next few days, do you have pics of the TCM? If its a supported TCM it shouldn't be too difficult to add support, however if its an unsupported TCM there won't be any options available.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
actual pictures of the tcm. hmm will look to see if I can find the tcm, any hints where it might beOriginally Posted by Bill@HPTuners
It's located on the transmission case. See diagram attached.Originally Posted by SS_SC_Cobalt
thanks will do my best but that looks to be right under the turbo...Originally Posted by VTuner
Unless that part on the left side is the pan and they rotated the trans for the picture
Maybe you should start working on supporting the XWD eLSD! Coming soon to damn near every GM product near you!
Bill,
Can you provide any updates for us this week?
Thanks.
Originally Posted by Bill@HPTuners
I just emailed everyone who emailed me their Saab 2.8 files with the update.
If you didn't receive an email from me shoot me your saab 2.8 .hpt file along with your serial number & I'll post the update to your account.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Bill, do you want the hpt file emailed to you?Originally Posted by Bill@HPTuners
Send support at hptuners.com your .hpt file along with your serial number & a link to this thread.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Done!