Has anyone set up an IFR table for injectors of this size on a 2006 6.0L?
Injector Spec's
Static Flow Rate: 76.65 lb/hr @ 43.4psi (n-Heptane)
Dynamic Flow @ 2.5ms PW @ 100Hz: 16.88 mg/pulse +/-10% @ 2.5ms PW @ 100Hz Coil Resistance: 12.2 Ohms (+/-0.35 Ohms)
The injectors should flow about 92lb at 63.4psi rail.
My IFR table doesn't max at 63.4. (254 lb max)
Any advise about changing the other tables to work together:
Short pulse limit
Short pulse adder
Min Injector pulse
Default injector pulse
Offset vs. Volts vs. Vac
Thanks