Results 1 to 3 of 3

Thread: Injector Parameters

  1. #1
    Senior Tuner LSxpwrdZ's Avatar
    Join Date
    Dec 2008
    Location
    on the Dyno
    Posts
    1,825

    Injector Parameters

    I was just wondering if anyone has compiled a spreadsheet of different injectors with the flow rate table's, battery offsets, min pulse etc. If not I'm going to try to compile a spreadsheet or upload a list of my 2000 Camaro tune with different injectors programmed. I'm leaning more towards a list of one tune file with different injectors because it will make it easier for a person to use it as a compare file and just simply copy and paste the new injector values over. If someone has already done this I have overlooked it somewhere and I have searched alot. -James
    James Short - [email protected]
    Located in Central Kentucky
    ShorTuning
    2020 Camaro 2SS | BTR 230 | GPI CNC Heads | MSD Intake | Rotofab | 2" LT's | Flex Fuel | 638rwhp / 540rwtq
    2002 Camaro | LSX 427 | CID LS7's | Twin GT5088's | Haltech Nexus R5 | RPM TH400

  2. #2
    Tuning Addict WS6FirebirdTA00's Avatar
    Join Date
    Jan 2005
    Location
    Concord, NC
    Posts
    8,093
    There are a lot of half ass attempts but none with the correct values as supplied by the injector manufacturer (except for a few).
    Sulski Performance Tuning
    2000 WS6 M6 - LS6 (long block, refreshed top end), 10.8:1 CR, 90 mm ported FAST, Exo-Skel, 227/232 cam, QTP HVMC, EWP, GMMG, 9" w/4.11s
    2018 Sierra SLT 5.3L A8 - Airaid intake tube, GM Borla catback, L86 Intake/Ported TB

  3. #3
    Senior Tuner LSxpwrdZ's Avatar
    Join Date
    Dec 2008
    Location
    on the Dyno
    Posts
    1,825
    Well I wish I knew a way to get each different brand injector flowed to provide spec sheets on each injector and create a database so it would solve the headache of hacking the injector parameters together. I'm just a perfectionist and if it is in the back of my head that the pulse is different at 12v's than what I have in my voltage table it will drive me nuts...lol
    James Short - [email protected]
    Located in Central Kentucky
    ShorTuning
    2020 Camaro 2SS | BTR 230 | GPI CNC Heads | MSD Intake | Rotofab | 2" LT's | Flex Fuel | 638rwhp / 540rwtq
    2002 Camaro | LSX 427 | CID LS7's | Twin GT5088's | Haltech Nexus R5 | RPM TH400