It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
I also wanted to voice my support of this - and point out that I, and many others, would be happy to see this even if it meant paying a little bit more than most tunes because of the extra development cost.
I really think this will be a big seller. The V6 in this car is not like older V6s - there will be a lot of people putting performance parts on it, and at a certain point a tune becomes a must.
- X
i know alot of commodore owners have been waiting for this for years now.
the issue relates to the reading of the ECM and it varies between operating systems. It affects some E77 and most E69 ECM's that we can tell. Hopefully we can come up with a way forward atht doesn't require reading the ECM over 2 hours... *sigh*
I count sheep in hex...
good enough?
Last edited by Bill@HPTuners; 08-27-2009 at 06:55 PM.
and mine
Last edited by Bill@HPTuners; 08-27-2009 at 06:55 PM.
thanks guys, yah same pcm as the cts, likely be a while
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
At the very least, I would like a tuner to have the ability to: 1. Remove the torque management. 2. Adjust for gear changes,tire sizes,etc. 3. Increase engine torque at lower RPM's.
Thank you
I can tell ya right now, the only reason I would buy a camaro would be to get one of these v6 cars and put a giant turbo setup on it.
I know the motors are ready for some extra power, and by the time you have the tuning unlocked, there will be a decent ability to upgrade the direct injection system, so the tuning side of things needs to be locked in before the injection modifications are made.
if it is anything like the saab DI + stock turbo setup, then there should be plenty of room in the DI system currently, at least enough to keep up with a SS LS3 camaro.
I need support as soon as yesterday
Regards,
Brian Turner
Dyno Tune Motorsports
Dyno Tuning and Remote Tuning For Ford - GM - Chrysler Vehicles
Click Here For Dyno Tune Motorsports
1988 Ford Mustang GT INCON Systems TT
331 Cubic Inches - Corn - 808 RWHP 918 RWTQ
ive been able to scan one but not read :/
Bader Norris
MEP Tuned
Telephone: +965-55446651
Email: [email protected]
Any update ?
No update, haven't had a chance to look into them any further & likely won't be able to for some time.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Hello Bill ,
I think you know that we are waiting for the e77 reading since 2007 right ?
Ok and??? there are alot of people waiting on tuning options, doesn't mean we have the resources to look into it any further, just means they are waiting. One of our customers was nice enough to send us an E77 pcm recently so hopefully that will speed things along but no guarantees at this point other than at least we finally have one of the pcm's at our disposal.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"