I am going to switch my 2002 gtp to E85. I have read all the posts about using E85, and one thing is still not clear to me- maybe you guys can clear it up....
I am putting in 60# injectors- Flow Rate vs. kpa will be adjusted to them
I will change my Stoich AFR setting to 9.85
Question is- do I need to change the PE Base AFR vs. ECT table to reflect the best AFR for the e85 (6.9 to 7.2) or do I leave it at best gas settings (11.0 to 11.5)???
The scanner, I assume, will read as if it were still gas and tune from there, correct???
And please no arguments as to skewing IFR vs. changing stoich- THANKS