As the title says I have a 4T65E transmission that Im trying to get to shift faster on upshifts.
What I'm thinking is if I go to Auto TCC and decrease the time the TCC takes to engage would main faster apply and release.
This is where I start to get confused, I look under apply release speed full throttle, I go to normal. it says the speeds are MPH, and they are at like 318 for the 2nd apply, 122 for 3rd apply, 318 for forth.
can someone please enlighten me
For faster shifts you want to change the desired shift time tables. Can post your tune file.
Ian
2008 Corvette A6 - Comp Cams 231/239 617/624 109 ICL 113 LSA, Patariot Extreme Dual Springs .660", Milled .30" Stock LS3 Heads, Mahle -4cc pistons, FTI 3600 Converter, 1 7/8 kooks cat-less 3 inch X-Pipe, air raid intake, ported TB, SLP Loudmouth I. 512hp/464tq
2011 Ford Taurus SHO - stock with just a Tune
Where are the shift time tables
The shift times are located in Shift Properties.
2008 Corvette A6 - Comp Cams 231/239 617/624 109 ICL 113 LSA, Patariot Extreme Dual Springs .660", Milled .30" Stock LS3 Heads, Mahle -4cc pistons, FTI 3600 Converter, 1 7/8 kooks cat-less 3 inch X-Pipe, air raid intake, ported TB, SLP Loudmouth I. 512hp/464tq
2011 Ford Taurus SHO - stock with just a Tune
Everything under shift properties is dealing with psi
Under "Shift Properties" you should have a tab entitled "Desired Shift Time", under that "Normal" and "Performance". Those are time based tables.
2000 Trans Am WS6
I have absolutly no tabs under any of the transmission menus. Auto shift speed, shift properties, general pressure(which has nothing at all), auto tcc, manual cags, torque managmnt. This is for an 06 Monte Carlo ss
Dam, I am very familiar with the trans you are working on, but only in the Grand Prix's. Could you post your tune to have a gander at?
2000 Trans Am WS6
here is my file im working with
Thank you for trying to help with this.
This what i see when i look at the shift properties tab. What version of Hp Tuners are you running?
2008 Corvette A6 - Comp Cams 231/239 617/624 109 ICL 113 LSA, Patariot Extreme Dual Springs .660", Milled .30" Stock LS3 Heads, Mahle -4cc pistons, FTI 3600 Converter, 1 7/8 kooks cat-less 3 inch X-Pipe, air raid intake, ported TB, SLP Loudmouth I. 512hp/464tq
2011 Ford Taurus SHO - stock with just a Tune
Ok, Im seeing what 92 is posting as well, I do not get the tables that mad is showing there. Did I miss an update too??
I have beta 2.23, that's probably why i can see them. E-mail [email protected] and they will hook you up with the latest Version.
Ian
2008 Corvette A6 - Comp Cams 231/239 617/624 109 ICL 113 LSA, Patariot Extreme Dual Springs .660", Milled .30" Stock LS3 Heads, Mahle -4cc pistons, FTI 3600 Converter, 1 7/8 kooks cat-less 3 inch X-Pipe, air raid intake, ported TB, SLP Loudmouth I. 512hp/464tq
2011 Ford Taurus SHO - stock with just a Tune
I'm not sure, I'll try and update when I get home. Last week is when I got and installed the program
92, you will have to contact support to get those tables. You need the beta version it seems to do it! I guess the boys must be close to another release. 2.24 is coming I assume... lol
Mine is 2.22
2000 Trans Am WS6
is there some where i can download this beta from, i just contacted their support section
They will e-mail it to you I believe.
2000 Trans Am WS6
Reply With Quote