If you had to make a quick checklist...

[magnet]

I'm somewhat lost and trying to figure out what order to do things. From what I've gathered it seems like it should go something like this:

-learn to scan
-learn basics (dtc's, rev limiter, fans, shift points etc)
-VE
-MAF
-AFR

correct where I'm wrong.. I think this would help a lot of people out..(including me)

[murphinator]

your list is exactly in order as I understand it

different people with different plaforms may say maf before ve but most posts I have read start with ve , other than that I cant see where anything else in your order would be changed

[magnet]

your list is exactly in order as I understand it

different people with different plaforms may say maf before ve but most posts I have read start with ve , other than that I cant see where anything else in your order would be changed

sweet..thanks for your input!

[WS6FirebirdTA00]

Here is a little more complicated but is a good way to go about it:

-Base spark and commanded AFR (with richer VE/MAF)
-Tune the VE
-Tune the MAF
-Final tweaks on spark and AFR
-Final verification of fueling tables

I just like checking things twice to be certain