Results 1 to 5 of 5

Thread: Guys tuning LBZs...what editor are you using?

  1. #1

    Guys tuning LBZs...what editor are you using?

    Are you running Beta 2.23.xx or non-Beta 2.22? Any pre-cautions y'all are using when uploading tunes? I've loaded a few tunes onto the LBZs successfully but as of late, I've been burning up computers.

    Any thoughts?

  2. #2
    Senior Tuner
    Join Date
    Feb 2009
    Posts
    1,931
    I have had difficulty doing anything with high speed communicatioins on diesels. On the LBZ's the communication error is frequent, always doing a reread. So, I always disable high speed read and write(i know, it sucks, but error free). I have also gotten into habit of pulling radio and onstar fuses, and writing with driver door open. Have no specific proof/data, but seems to consistantly work with fewer errors.

  3. #3
    Where are those fuses located..under the seat or in the engine compartment?

    Thanks!

  4. #4
    i believe they are under the hood. they should be labeled on the lid of the fuse box

  5. #5
    Yea...found them last night...under the hood....Radio fuse is a 15 amp fuse on teh bottom right.

    I figured out my problem thanks!