configuring map sensor in scanner,HELP!!!!

[keith42]

my car is speed density with a 3 bar map sensor, how do configure the scanner to read 300kpa? I know how to configure for EIO inputs but not the standard inputs

I did change the scale on the gauges and tables to read 0-300kpa but it only reads to 105kpa in boost, I guess that means I need to delete the standard map and load a 3bar config? Can someone explain how to do that? I'm sure I'm just overlooking something.

[Google]

post your tune

[keith42]

tune is fine, trying to set up the scanner.

[Google]

did you set up the 3bar map in the tune?

[keith42]

Yes, had a tuner do, it's been running 3bar speed density for a while now, just when I recently tried to do some scanning with my own hptuners it doesn't read. I could ask the tuner to send me his scan config but I want to learn this stuff.

[Google]

right click on the table display and click insert, then click configure user defined and set up your map

[keith42]

Thank You I'll try that. I appreciate your help.