Results 1 to 11 of 11

Thread: Got tired of those FAST 36lb :(

  1. #1
    Potential Tuner Mahdi's Avatar
    Join Date
    Jun 2010
    Location
    Saudi Arabia, Qatif
    Posts
    5

    Got tired of those FAST 36lb :(

    Hi,

    I'm using FAST 36lb injectors on my 01 SS and it run too rich in open loop specially at idle even I adjusted the flow rate vs KPA table

    I tried to find the following injectors data but cannot find anything and read that the manufacture for those FAST injectors is not providing them

    - Offset vs. volts vs. VAC
    - Flow Rate Vs. KPA
    - Short pulse limit
    - Short pulse Adder
    - Minimum Injector Pulse
    - Default Injector Pulse

    Now I'm planning to change the injectors to Bosch # 0280155811 from speedinc



    So before I buy them, are the injectors data availabe for those injectors or not ? if Yes can you provide them in advance ?
    CAMARO SS 2001

    Forced Induction What ? Nitrous Rulz

  2. #2
    Advanced Tuner
    Join Date
    Dec 2005
    Location
    Texas
    Posts
    254
    they're supercharged 3.8 injectors, I'm sure the data is on here somewhere

  3. #3
    I am 99% sure that the FAST 36lber's and the ones you show advertised by Speed Inc are the same.

    From what I recall these were used in the 3.8 Supercharged engines for the Buicks and Pontiacs.

    I have used them quite a bit with no issues and they used to be used a lot by Procharger and Magnacharger when they first started building LS SC kits.

    Mike Norris
    Mike Norris Motorsports
    660 Andico Road
    Unit D
    Plainfield, IN 46168
    407-616-2518
    www.mikenorrismotorsports.com
    [email protected]

  4. #4
    Potential Tuner Mahdi's Avatar
    Join Date
    Jun 2010
    Location
    Saudi Arabia, Qatif
    Posts
    5
    So that's mean you have the injectors data for the FAST 36lbs ???
    CAMARO SS 2001

    Forced Induction What ? Nitrous Rulz

  5. #5
    Advanced Tuner Dragman's Avatar
    Join Date
    Mar 2004
    Location
    kentucky
    Posts
    491
    I have these 36 pounders also. I thought they are a Ford injector because of fuel pressure that make them 36 pounders. Looking for data also.

    Fastest A4 Coupe Bolt On's
    11.33 @ 119.84 mph OLSD Tune

    Tuning done by www.GearsAreUs.com

  6. #6
    Advanced Tuner
    Join Date
    Dec 2008
    Location
    Old Orchard Beach Maine
    Posts
    915
    those sure do look like the 36 pounders that are in 3800 supercharged series 2 (L67) I have sold many used ones for $15 each out of cars I part out.

    if they are the l67 injectors any stock regal gs ,gtp,ssei, ultra etc..would have the data you need but you would need the latest beta to access it , public 2.22 only has access to flow rate vs kpa and injector skew
    PB's 1/4 mi 12.21 117.75 trap ,1/8 mi. 7.779 93.99trap , 1.949 short time (FWD W body)

  7. #7
    I'm using these in the same vehicle as in your sig and have no issues like this.
    Try these settings.

  8. #8
    Advanced Tuner 69lt1bird's Avatar
    Join Date
    Oct 2007
    Posts
    983
    If you are going to buy new injectors, why not get some that take less work. Call FIC http://fuelinjectorconnection.com and get a set that match your vehicle and are eay to tune, no special data, just use stock GM tables and change the TFR table to match the injectors.
    Free HP Tuners Beginners Tuning Guide

    LS1 Tuning Guide
    Michigan Snowmobiler

    1969 Firebird: 11.67@114 [email protected] 1/8 1.70 60 ft. EPS cam 234/246 .602.606 114+3, 6.0 LQ4, L92 heads milled 10.5:1, Ported L76 intake, ported 90mm Holley TB, 100mm MAF, FIC Custom injectors, Hooker LT, PYPES dual exhaust with an X pipe, 4L65e with all of the good parts inside, FTI 4000 RPM Stall, 12 bolt with 3.73 gears. HP Tuner tuned by me

  9. #9
    Potential Tuner
    Join Date
    Jun 2010
    Posts
    2
    I already contact them and they recommend running the new bosch 36lbs !..

    I already went with Bosch/Ford Red Top 30lbs

  10. #10
    Advanced Tuner 69lt1bird's Avatar
    Join Date
    Oct 2007
    Posts
    983
    Quote Originally Posted by Stealth Camaro View Post
    I already contact them and they recommend running the new bosch 36lbs !..

    I already went with Bosch/Ford Red Top 30lbs
    Now you need the correct injector data for the SVO Red Tops.
    Free HP Tuners Beginners Tuning Guide

    LS1 Tuning Guide
    Michigan Snowmobiler

    1969 Firebird: 11.67@114 [email protected] 1/8 1.70 60 ft. EPS cam 234/246 .602.606 114+3, 6.0 LQ4, L92 heads milled 10.5:1, Ported L76 intake, ported 90mm Holley TB, 100mm MAF, FIC Custom injectors, Hooker LT, PYPES dual exhaust with an X pipe, 4L65e with all of the good parts inside, FTI 4000 RPM Stall, 12 bolt with 3.73 gears. HP Tuner tuned by me

  11. #11
    Tuning Addict WS6FirebirdTA00's Avatar
    Join Date
    Jan 2005
    Location
    Concord, NC
    Posts
    8,093
    Yeah, doesn't FAST use the same exact injector?

    I have the tables for those injectors posted in the stickies.

    http://www.hptuners.com/forum/showth...254#post215254
    Sulski Performance Tuning
    2000 WS6 M6 - LS6 (long block, refreshed top end), 10.8:1 CR, 90 mm ported FAST, Exo-Skel, 227/232 cam, QTP HVMC, EWP, GMMG, 9" w/4.11s
    2018 Sierra SLT 5.3L A8 - Airaid intake tube, GM Borla catback, L86 Intake/Ported TB