In the middle of the reflash, the write failed and now the car will not start. I have tuned the car on the dyno and had no issues. Any ideas?
In the middle of the reflash, the write failed and now the car will not start. I have tuned the car on the dyno and had no issues. Any ideas?
2008 Corvette Coupe
Atomic Orange, 3LT, NPP, F55, CC3 and MN6
I would guess the cars battery went to low to finish the flash. Check the battery volts and if they are low place a charger on the battery and try Re-flashing.
I will check that and hopefully do not need a new PCM.
2008 Corvette Coupe
Atomic Orange, 3LT, NPP, F55, CC3 and MN6
I connected the battery charger and the battery was good. It was at 85% and still cannot flash the PCM. The scanner will not connect either. Is there any way to reset the comm bus? The dash shows DTE ODO Data Error.
2008 Corvette Coupe
Atomic Orange, 3LT, NPP, F55, CC3 and MN6
Checked PCM fuses and diodes as well. Nothing stands out and still troublshooting. I also made sure the OBDII port had power.
2008 Corvette Coupe
Atomic Orange, 3LT, NPP, F55, CC3 and MN6
what beta are you using?
The latess and greatest.
2.23.3895.38038
2008 Corvette Coupe
Atomic Orange, 3LT, NPP, F55, CC3 and MN6
try an older one that worked and see if it will recover the flash. if not email support as they have a newer one out now that may fix it.
Still will not find the VCM. Also, the dash beeps a lot more and has faults for the Traction Control, ODO, Fuel Level, etc.
2008 Corvette Coupe
Atomic Orange, 3LT, NPP, F55, CC3 and MN6
seems similar to my 2009 issue I had a few days ago. In my case no power failure, not even writing, but PATS got activated. Bill send me a beta version and it could recover PCM. The latest and greastest could not either.
contact support
I email them and being Saturday, not expecting any timely feedback. I am having it towed to a Ford Dealership and I will go from there.
2008 Corvette Coupe
Atomic Orange, 3LT, NPP, F55, CC3 and MN6
you got PM
I just had the same problem tonight tuning a 2005 any ideas on how to fix this problem?
I had the same problem... used an older beta version and it worked great, got the vcm recovery up and working with no problems
Bader Norris
MEP Tuned
Telephone: +965-55446651
Email: [email protected]
That is good to hear and the Mustang is at the dealership. I called the service advisor and left him a message that I want another shot at recovering it. They haven't started working on it yet and do not want another PCM. Those things are $750 and they still need to flash it for more $$$.
2008 Corvette Coupe
Atomic Orange, 3LT, NPP, F55, CC3 and MN6
Well, I used an older version and it worked. The VCM recovery worked as normal and the Mustang started right up. Thanks guys and if I could by a round of beers, I would.
2008 Corvette Coupe
Atomic Orange, 3LT, NPP, F55, CC3 and MN6
Newest beta also should be able to recover as well.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"