Results 1 to 2 of 2

Thread: 07 LS2 Vette auto - GM hot cam kit

  1. #1
    Advanced Tuner
    Join Date
    Sep 2006
    Location
    Lake of Como - Italy
    Posts
    219

    07 LS2 Vette auto - GM hot cam kit

    hi guys,

    I've just istalled the GM hot cam kit into this Corvette.
    I've done the VE tuning with the Bluecat SW, MAF tuning, and minor changes in idle and tranny. I will go deeper later into tranny idle and small stuff.

    the question is:
    WHY the engine is knocking? I see ten degrees of knock retard, that it's a lot.
    I've put back the stock timing and is knocking again.
    any tips?
    thank you.

    the only other mods are the 160°F thermostat and the axle back Magnaflow exhaust with Air Aid CAI.
    stock exhaust manifold and cat converter.

  2. #2
    Drop timing in half and if it doesn't get better, you have a mechanical problem.
    2001 Z06 - 417 LS3 - LPE CNC LS3 heads - LPE GT-11 cam - ARH 1 7/8" - LPE C6 intake - RPM 3.73 diff - tuned with HP Tuners
    2008 Silverado 5.3 - Dynatech LT headers - Volant Cool Air intake - 280whp/303wtq - tuned with HP Tuners

    www.davenportmotorsports.com