Wide band is in, cannot log data

[Gibby]

Ok, so I installed my wideband today, PLX SM-AFR
I have it simulating the NB O2 which is working, The WB it self is working, I followed this write up to a T

http://www.hptuners.com/forum/showth...&highlight=plx

It was written very well and was easy to follow, all my wiring is done this way, but I cannot log AFR with the WB.. Do I need to enable something in my HPTuners? I tried to set up a PID but that didnt seem to do the trick..

Thanks!

[Gibby]

This is all I am seeing

"This Histogram is not supported with the current loaded parameters."

And it follows that with a few more paragraphs...

I cannot seem to get it to read from my PLX, any Ideas on how I have to configure this thing so it will talk to my HPT??

[Gibby]

Figured it out.. Thanks anyways