-
Tuner in Training
timed out?
So today I put in my bigger injectors for the turbo build and modded the inj constant as seen below, started the car and it was tryin to idle higher than norm at like 1k and bouncin to like 1200 and back down, so I figured it wasn't right so I shut the car off and tried to write entire on the stock flash but it only gets to where it say erasing vcm calibration and stops and says mode 2 timed out. any ideas?
inj constant was as follows
new inj lb. / old inj. lb x old inj constant.
thanks for the help.
-
Tuner in Training
currently working on this via email will post resolution when Bill and I figure it out.
-
Tuner in Training
Well tonite it worked no rhyme or reason.