Results 1 to 3 of 3

Thread: MAF vs SD 2 bar

  1. #1
    Tuner cfar's Avatar
    Join Date
    Mar 2007
    Location
    FL
    Posts
    107

    MAF vs SD 2 bar

    I know this has been hashed out many times but I am at moneys end with tuners and It doesnt seem to get better.
    5.3 running whipple 8 psi but only see 6 psi boost no matter what-that is not the issue...
    Can I run the MAF at this boost since no one I have used can get the VE and timing right-truck runs ok.But used to run better at 5psi.Runs rich and ingeneral sucks gas-only get max 12 MPG at crusing speed.I know im not doing this for mileage ,But if it was performance I should be getting, I would not complain.

    Should I go back to MAF and retune from there.
    Anyone in Orlando area want to take a look at this?

    thx

  2. #2
    Tuner in Training
    Join Date
    Jan 2011
    Posts
    49
    I can help you, but I'm in Tampa.

    Do you have:

    1) HPtuners
    2) A wideband
    3) Wideband hooked into HP tuners?

  3. #3
    Tuner cfar's Avatar
    Join Date
    Mar 2007
    Location
    FL
    Posts
    107
    yes
    yes
    yes