Do any of these cars have the MOPAR TCM upgrade? The one I had did and I am curious if there is a correlation.
Jaime
My car has the stock TCM in it.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
I was pretty concerned when I saw the checksum failure. I thought it might be that they dropped it from the stock tune when it got pulled onto the device.
I'm pretty sure you already have my tune, but should I send in the one I pulled with this beta along with an infolog while connected to the car?
Sent.
So hey I'm a little late to the party, some of you know me...
So to save some time and just instead of reading each PCM why can't you just take the Chrysler StarMobile calibration flash and read the engine calibration from that????.
FWiw i just sent in my Infolog,.hpt file for my brothers srt-4.. Came up w/ a checksum validation error.. And his car is stock... as far as scanning are there any other pid's avail for these car's? such as Knock etc?
The 05030232AF (I think) OS has the Enhanced PID's loaded, but this is only for the 06 LX 6.1 HEMI's. Their may be others, but this is the only one I know for sure. They have to add all of the OS's to the scanner for the enhanced PID's to be available and I don't think that has happened yet.
Jaime
I have a 2011 Grand Cherokee 5.7L Hemi Anything you need from me Bill so I can help speed up the support for these things?
So far I have checked an SRT4 and an SRT8 that were previously tuned with Diablo. Even returning them to stock gave me a checksum error.
Yes please.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
I downloaded my beta again after submiting and now I get a Unable to open file. File failed validation check. Do I need to pull the file again?