As the title says i'm new to tuning fords. I have been tuning LS based motors for about 4 years now. I have also done a few bolt on mustangs. I'm about to do a car we built 5.0 stoker motor, ported heads, comp stage 3, blower cams 2.3 whipple supercharger 18% over drive crank pulley 3.00 pulley on the blower. This setup should make around 19 or 20 pounds of boost. I'm just looking for a pointer or two maybe a good list of what to log in the table.

Thank you for your input.