I've tried high, low speed, pulling fuses, and this thing will not read. I can scan and read DTC's, put can't read the tune. Anything else I can try?
I've tried high, low speed, pulling fuses, and this thing will not read. I can scan and read DTC's, put can't read the tune. Anything else I can try?
If the truck has an aftermarket radio, ipod adapter or Xm/Sirius attachment added to the factory radio pull these fuses under the hood before reading
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Doesn't have any add ons, other than a brake controller. It does have the factory xm, in the head unit, but I've pulled the fuse. Heck, I've pulled a ton of fuses, without luck. I think the only last option is to take it to a dealer, and see if their tech II can flash it. I'm at a loss with it at this point. I never have a problem with my car.
What ever happen with this truck? why didnt it read?
i had the same trouble with a stock 03 lb7. wouldnt even read on a bench harness. i bought a used ecm and it read fine, even in the truck. support said it looked like the ecm was spewing out vats code every few millaseconds and wouldn't let it connect. if anyone else is having this problem maybe try doing a vats relearn first.
03 DURAMAX LB7 mostly stock ccsb
03 CORVETTE Z06
having the same problem here with 04/ Stock everything even the radio. Wont work at all. What fuses to pull the radio? or is there a problem with my software/interface? The computer in it is the way it left gm
I have had success with the following methods.
1)Disconnect batteries for a couple of mins and retry
2)Pull radio and onstar fuse and try to read
3)Ask for latest beta as newest version seem to communicate better.
Haven't been on here in a while. I haven't messed with the truck in a while, been busy with other projects. I had a buddy read the pcm with a tech II and it will pull the file from the ecm. We made a change for tire size and tried to reload it, it wouldn't load. I'm thinking there is something wrong with the ecm. Why the tech II pulled the file and HPT didn't, I don't know.
I will probably play with it some this weekend. If I can find a new ecm cheap, I'll try that also.
i am having problems reading my 2004.5 ...I havent pulled any fuses but I will try that tomorrow. thanks
2010 Camaro SS - 427 Stroker - Kenne Bell - 735 rwhp / 665 rwtq
2005 Pontiac GTO - HP Tuners, flowmaster mufflers ...12.77@108 344 rwhp /344 rwtq
2004 Silverado 2500HD Diesel - 527 rwhp / 840 rwtq...so far
Also make sure you try reading in low speed mode.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
worked great, didnt even have to pull any fuses. Thanks !!
2010 Camaro SS - 427 Stroker - Kenne Bell - 735 rwhp / 665 rwtq
2005 Pontiac GTO - HP Tuners, flowmaster mufflers ...12.77@108 344 rwhp /344 rwtq
2004 Silverado 2500HD Diesel - 527 rwhp / 840 rwtq...so far