Gen III support would be great.....that would be a big help....
Gen III support would be great.....that would be a big help....
Your intercept is zero... Look at the value for 0Hz.
DSX Tuning - Authorized HP Tuners Dealer
http://www.dsxtuning.com
http://www.facebook.com/dsx.tuning
Just say no to bull s***.
IF YOU WANT HELP, POST A FILE!
I guess what I meant to ask is should I be afraid of the negative values?
Just don't use them. I said earlier this is going to carry some error in the lower frequencies.
DSX Tuning - Authorized HP Tuners Dealer
http://www.dsxtuning.com
http://www.facebook.com/dsx.tuning
Just say no to bull s***.
IF YOU WANT HELP, POST A FILE!
Fair enough. I think I had a converter (or both) clog on me last night anyways, sitting on the highway with the cruise control on...either that or I had the most uneventful noise free engine failure in the history of the world...it just can't stay running. I'll hopefully fix it tonight and then get back to this.
This is great. Dave, did you ever do one of these for the Gen III PCM?
Nope. I could probably manage when I get some free time.
DSX Tuning - Authorized HP Tuners Dealer
http://www.dsxtuning.com
http://www.facebook.com/dsx.tuning
Just say no to bull s***.
IF YOU WANT HELP, POST A FILE!
2003 Escalade ESV, 408, 2.9 Whipple, Dragonslayer, Compstar I-Beams, Wiseco 20cc, PRC LS3/L92 Heads, 231/242 .617".610" 113, ID850's, ARH 1 7/8 LT's, 4L80e, Circle D Triple Disk 2400, SFI Flexplate, Custom 3" Dual Exhaust, LS3 Harness E38/T42 Controllers, ZR-1 MAP, Chiller System
SemperFi
is this still available
Not sure if Dave wants this posted or not - honestly not even sure why anyone would want what the editor already does, but here it is - I've also never really used this, just had it in my spreadsheets... Dave if you want me to take it down, just let me know...
2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80
~Greg Huggins~
Remote Tuning Available at gh[email protected]
Mobile Tuning Available for North Georgia and WNC
Ya the smoothing function is similar. I actually already put a spreadsheet together that fits a curve based on any polynomial order you desire. Then spit it back out. Pretty easy
I actually don't know why the attachment is gone.
DSX Tuning - Authorized HP Tuners Dealer
http://www.dsxtuning.com
http://www.facebook.com/dsx.tuning
Just say no to bull s***.
IF YOU WANT HELP, POST A FILE!
I am trying to understand the spreadsheet, when I put in my current maf settings and compared to the new curve some areas like @ 3000hz went from 6.487 to 16.38. Won't that make my fueling way off by saying there is a lot more air than before?
Please explain.
I just found this myself. Copied in my existing data and my values from 150Hz to 2850Hz are now negative. That can't be right, can it?
It's a math based operation. It isn't meant to be gospel or a perfect fix. It is intended to fill in areas where you don't have data or smooth things out.
DSX Tuning - Authorized HP Tuners Dealer
http://www.dsxtuning.com
http://www.facebook.com/dsx.tuning
Just say no to bull s***.
IF YOU WANT HELP, POST A FILE!
this looks to be very interesting