We are ready to start public beta for 2012 Chevy Sonic 1.4ltr turbo(E78). If you are interested please email support@
Features:
- over 500 editable parameters/tables/axes
* Please note: T76 TCM tuning is not available in this release.
We are ready to start public beta for 2012 Chevy Sonic 1.4ltr turbo(E78). If you are interested please email support@
Features:
- over 500 editable parameters/tables/axes
* Please note: T76 TCM tuning is not available in this release.
Last edited by Bill@HPTuners; 06-14-2012 at 05:38 PM.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Good job guys... I'm ALMOST sad I sold the Sonic. Well ... not really, I like this Audi a lot more heh. Either way I'm glad you guys came through.
Using the latest beta (2.23.707), I downloaded the stock tune for my 2012 Sonic 1.4T (with 6-sp manual). I read through the excellent E78 tuning guide and started working on some of the tables. However, I can't seem to find the driver demand tables. I go to Engine - Torque Management tab - Engine tab and all I see under Driver Demand is Use Calculated VSS, NV Ratio, and Torque Shaping. I don't see any of the other tables shown in the E78 guide. Am I looking in the wrong place, or am I just going crazy?
Last edited by camarodoctor; 08-09-2012 at 10:52 PM.
make sure you have selected Edit -> View -> Advanced.
I count sheep in hex...
I'm confused by the driver demand tables. They are apparantly in horsepower instead of torque. There is no units selection. It's kw only. The columns say "vehicle speed mph" however it seems to be RPM values in km/h units in the axis table. Can anyone shed any light on this for me?
post a file? I don't see RPM in the axis.
I count sheep in hex...
Sorry for the delay in betting back to you.
I am looking at the stock 2012 file posted in the repo.
Engine->Torque Management->Engine->Map A Normal
Says "Vehicle Speed (mph)" up top. If I click on this axis and change units to km/h they look like good RPM values. 500, 750, 1000, 1250, etc.
Looks like a label issue.
Also, this table says its 0 - 10000 kw but the data inside shows points around -50. I am unable to change the units. Any thought?
Has anyone been working on making the 2012 E78 run in "standalone", as in engine swap without BCM, TCM, and CAN?
Never mind, It works.
I sent an email with a scan attached from a 2013 Sonic 1.4. It looks like it is not supported. I hope this is easily fixed because one of the reasons I got this car is to play around with my old HP Tuners from my GTO.
Bill or anyone, do you know if you guys will support the new Chevrolet Trax? It's only available in Canada i hear. Based on the same platform as the Sonic, but a mini-suv.
Cheers.
Anyone thats sent us in their .hpt file will be emailed once an update is ready.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
So is the 2013 Sonic Turbo supported for tuning now?
Yes. Read one out yesterday.
Edit: sorry, it was a Cruze.
Jaime
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"