First off I am 2 bar SD tuned running e85 (actually e70 as tested). I have tuned and logged probably 20 times on the new (Good) injector data I was provided. What I am seeing is issues at 30kpa. Every log shows a percent error between -10 and -22 regardless of what I change the value to.
Has anyone seen this and know of a solution?
I have fuel trims, DFCO, and cot turned off to not mess with the log can you verify the tune is set up correctly for logging and tuning?
On a side note do I have my LC-1 Pid set up correctly to read e70 with a stoich of 11.16076