iat 1 read 120 degree c ..

[stevensc]

hi


i have cobalt ss s/c 06.

My iat 1 stuck to 120 degres celsius.. i have no codes nothing.. the iat2 work very well.
i dont understand why, and i dont use the hpt virtual gauge. i select the sensor SAE for the iat1 and i only read 120-123-127 degree celsius.

second question

can i read a oil pressure from stock sensor or i need to link an autometer or another aftermarket sensor with her own sensor.

im sorry for my english i speak french but i will understand your reply..

Thanx you

[cobaltssoverbooster]

you can read an oil pressure sensor with hpt.

[Iam Broke]

Perhaps you have a bad iat1 sensor or intercooler pump failed. Seems very hot in Celsius.

[Knightwolf]

I tried to read oil pressure, but I didn't get any readings.. what did I do wrong with that one? I'm reading Oil temp now, but unfortunately, it's calculated which is almost worthless....

[cobaltssoverbooster]

if the rpd can read it so can you knightwolf. take a step back and look at your options for record-able sensors on the primary table.

[stevensc]

I tried to read oil pressure, but I didn't get any readings.. what did I do wrong with that one? I'm reading Oil temp now, but unfortunately, it's calculated which is almost worthless....

Same problem.. have try all possibility.. oil press 0 .. im reading oil temp too..

[stevensc]

my iat 1 cant be wasted.. my computer have no code. i cleary run my car in all code condition.. i will test it tonigh with a dcm .. its propably a resistor this sensor. i will trick its with a jump wires and see if htp read some temps..

[stevensc]

thx for your reply !very apreciate. and have a good summer for all.