hello did a read friday night on a f350 with 5.4l. read out alright but gave ome index out of bounds.
will these be supported in the near futute
Tinmaster_f350.hpt
hello did a read friday night on a f350 with 5.4l. read out alright but gave ome index out of bounds.
will these be supported in the near futute
Tinmaster_f350.hpt
97 k2500 ecsb 5.7l/4l80/4x4 0411 pcm,thorley tri-y's,true duals(no cats),msd ign.,zz4 cam, tuned with efi live
Its already supported in 2.24
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Is it possible there may be an issue with the template? I'm getting a lot of erroneous values in the editor and some blank "Switches"
Using version 2.24.227
Jaime
anything is possible, I can't open files on this pc but if you send me an email reminder I can have a look in the morning on my work pc.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Took a look at the file and to me it looks like the file in the pcm is just screwy, I'm pretty confident each and every table & switch in that def isn't wrong
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
ya read was from f350 didnt think it was even going to work, but read out just doesn't look right and gave error messages
97 k2500 ecsb 5.7l/4l80/4x4 0411 pcm,thorley tri-y's,true duals(no cats),msd ign.,zz4 cam, tuned with efi live
just down loaded latest version and still lots of blank switches
97 k2500 ecsb 5.7l/4l80/4x4 0411 pcm,thorley tri-y's,true duals(no cats),msd ign.,zz4 cam, tuned with efi live
tokymon its likely NOT a software issue on our end as stated in my post last night. I'll have our ford engineer take a look when he has a moment though as I don't have a stock file with that operating system to test.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
I would get a Fresh read with the Latest Software you have now and see if it errors when downloading and if it is still corrupt.
Wondering if it is possible that with older software that did not recognize the Truck correctly that it may have corrupted file?
Not sure if that possible or how old your software was with original read.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
this is a stock truck never been tuned before.
97 k2500 ecsb 5.7l/4l80/4x4 0411 pcm,thorley tri-y's,true duals(no cats),msd ign.,zz4 cam, tuned with efi live
thanks Tokymon I'm having our ford engineer look into it.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Try redownloading & reinstalling this mornings build 2.24.235 or newer
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
will do. wont see truck till tonight.
97 k2500 ecsb 5.7l/4l80/4x4 0411 pcm,thorley tri-y's,true duals(no cats),msd ign.,zz4 cam, tuned with efi live
Using the file he posted above, that looks much better.
Jaime
Yeah the def got mixed up with another one, switched them around and all good again
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
It Worked.
thank you
97 k2500 ecsb 5.7l/4l80/4x4 0411 pcm,thorley tri-y's,true duals(no cats),msd ign.,zz4 cam, tuned with efi live