Help with Filter for VE-AFR% Error

[bfurches]

Hey guys...

Could one of you please setup, or explain to me what I need to do to filter my VE-AFR%Error data?

I am looking to eliminate anything that is "0 TPS" as well as any data logged for "30Kpa and Below". I have attached my current scanner config, and the table I am looking to filter is number 7 in the histograms.

Any help would be sincerely appreciated. Thanks.


CapriceLog.cfg

[mecanicman]

[SENS.90]>1 and [SENS.30]>29

Copy and paste the above into your filter

[bfurches]

[SENS.90]>1 and [SENS.30]>29

Copy and paste the above into your filter

I will be sure to give those a try
Thanks

[RonSSnova]

I think you need spaces after the parens a space after the > symbol as well. Also use & for the word "and". At least it seemed like I had to

[mecanicman]

I copied and pasted that right out of my config, works fine as is.

[RonSSnova]

Ok, I was in error