HELP MEEEEEEEEEEEEEE !
I installed Saab intake mani and am using the LSJ 2.5bar MAP sensor with IAT.
I was told to make this change for the new LSJ map, engine-diagnostics-
MAP SENSOR LINEAR= 270.59kpa and
MAP SENSOR OFFSET= -3.30kpa.
I did a WOT 2nd gear pull and my MAP kpa reading is only 145kpa this at 11psi.......hmmmmmmm
Where as before with 2bar MAP at 10psi I got readings of 175kpa.... which makes sense to me but not the above.
what have I DONE WRONG ?
any info is greatly appreciated !