2.25 beta and chrysler ??

[SonicEp81]

so far its working good but i was wondering if just on my end or are some of the systems nor being read as of yet. Im able to get into the engine,system, speedo and engine diagnostics but i get a blank sheet for trans,trans diagnostics and fuel system and OS. was wondering if its still in the works or if theres a glitch in the software not reading those certain parameters..

thanks guys

[Mark@HPTuners]

so far its working good but i was wondering if just on my end or are some of the systems nor being read as of yet. Im able to get into the engine,system, speedo and engine diagnostics but i get a blank sheet for trans,trans diagnostics and fuel system and OS. was wondering if its still in the works or if theres a glitch in the software not reading those certain parameters..

thanks guys

The reason you get blank sheets for some of the tabs is because there are no parameters mapped out in those tabs yet. A lot of the Chrysler vehicles do not have transmission parameters mapped out because the first priority was to get up to date with engine parameters. Depending on the vehicle you're reading you will see those tabs populated. Which OSID are you reading?

[SonicEp81]

thats what i thought originally just wanted to double check i have noticed other chrysler vehicles and they have trans and other parameters populated and as for the OSID its a 2006 chrysler 300 LX NGC3 with a swapped in 07 jeep srt8 6.1..

thanks again Mark