Oh stupid me. Here you go.
Edit: added file -
My Custom Gauges.Gauges.xml
Gauge properties.GaugeDisplay.xml
Check out the added logo:
Layout with Logo.JPG
Oh stupid me. Here you go.
Edit: added file -
My Custom Gauges.Gauges.xml
Gauge properties.GaugeDisplay.xml
Check out the added logo:
Layout with Logo.JPG
Last edited by OldFartC6; 01-03-2016 at 01:25 PM. Reason: Might need this file also.
2006 LS2 Corvette
Automatic
2.56 gear
600 HP Edelbrock E Force Kit
No other mods
Post a log and tune if you want help
VCM Suite V3+ GETTING STARTED THREADS / HOW TO's
Tuner by night
CPX Tuning
2005 Corvette, M6
ECS 1500 Supercharger
AlkyControl Meth, Monster LT1-S Twin, NT05R's
ID1000's, 220/240, .598/.598, 118 from Cam Motion
2007 Escalade, A6
Stock
This reminds me of a problem I stumbled across weeks ago. When I make and save my own layouts or load old layouts, I get all the parameters from the current layout plus the layout I just loaded. The result is I have to manually delete each item within the layout before loading a new layout. Has anyone else experienced this? Is there a way to mass delete the current layout or just switch to the new layout without it appending the current layout? Maybe there could be an option to append or switch to the next layout.
that's by design, when you use the individual controls (graph/chart/gauge) to save/load layouts.
If you use the main layout engine (on the menu or main tool bar), it will remove what you have, and load what you open.
We got this guy Not Sure, ...
Keith did you have a win with the MTX-L Innovate stuff? Are we able to account for ground offsets?
Ford BF Turbo Ute,Stock head/cams, In house built bottom end,Atomic Springs, Forged Rods,Cosworth Pistons,Atomic Billet oil pump gears,ARP Head/mainstuds,Process West Stage 3 Cooler Kit- Plazmaman plenum,Precision Int.Gate 6466,Manta twin 3" exhaust,ID1000s Plazmaman surge with Holley 12-1800 pump, Home Built ZF6H26, On United Pump E85 499rwkw 10.5@135mph https://www.youtube.com/watch?v=dgZupPhrMss
Latest mods, FG intake manifold conversion and ID1300s-500rwkw, Yet to see the 1/4Mile
It was requested that I post these math routines.
Boost.MathParameter.xml
HP.MathParameter.xml
TQ.MathParameter.xml
There is a fudge factor of 1.15. You will see it in the formula. I used it to match previous dyno results. Anybody that uses this formula will have to adjust it or do away with it.
Last edited by OldFartC6; 01-03-2016 at 10:52 PM. Reason: Fudge factor
2006 LS2 Corvette
Automatic
2.56 gear
600 HP Edelbrock E Force Kit
No other mods
serial data is too complicated to just have a simple transfer function like you can with voltage inputs
right the serial data that they have im assuming is a raw value of sorts, would just like the logging of that data to work.
I'm sure they can make it work. You need to give a clear description of what wideband you're using, what it's displaying, etc. so they can fix it though.
I'm not able to get my LM-2 to work with 2.25, through the USB port. Am I doing something wrong? Or is this not supported yet.
I try that so often and its not possible to show the same values like the LM-2 Monitor. analog output is very noisly and the serial show's wrong values.
Here in the forum are a lot of innovate users who can't get it usable...
I ordered now a Zeitronix ZT-3...that works good!
I have zero issues with using it in 2.24, as long as I use the same ground. It's a voltage reference, and it's referenced off the ground. If you use different grounds, then the values will be different.
I can't get any value to come up through the USB on 2.25, wrong or right.
my LM-2 serial works with 2.25. try it without any other USB device in the Laptop! If I use it with other USB connectors pluged in. no input to the scanner
BTW: I try a lot of different ground, together, single, direct battery, chassis, 12V output. every was the same. unusable. inavate support don't write an answer. never again.
hope Keith will add the ZT-3 serial input soonest!
Then just connect it to the interface and be done with it. If it worked fine in 2.24 it will work the same or better (much faster) in 2.25
Keep in mind 2.25 logs a LOT faster on external inputs... so you'll see more quick up/down variation than you're probably used to seeing. I've started averaging external inputs over 100msec or so just to smooth them out