had a checksum error on a 2013 ram 1500 i thought those were all sorted out ?
had a checksum error on a 2013 ram 1500 i thought those were all sorted out ?
Hi, Mark,
I found out about your tuner on post #12 on this page:
http://www.avengerforumz.com/threads...4/#post-257509
Nobody seems to support the Chrysler 2.4/40TES, even if they list it on their supported vehicles page.
Upon inquiry, they say "well, we support the 2.7 and bigger motors, but not the 2.4."
What I want to do is change the shift points on the 40TES transmission.
(40TES is basically a light duty 41TE, with a shallower bell housing)
I don't need to tune the engine at all. Long story.
I saw the shift table in your help screen/table editor;
if it works on my 2009 Dodge Avenger 2.4/40TES, it is PERFECT.
Has anyone tried the VCM suite in a 41TE/40TES transmission?
If your VCM suite will help me change the shift points, I will buy it in a heartbeat.
Thanks, --Douglas
Last edited by Clipper; 05-09-2016 at 03:14 AM.
will this always be the case? or someday not require this?*Note: 2015-2016 vehicles need to have their PCMs unlocked via the PCM Modification Service before tuning.
Just got hp tuner for my 2008 jeep wrangler. A lot to learn but having a lot of fun. thanks for a great product.
I have two older jeep wranglers 1999 and a 2003 any hope of seeing coverage for them?
2008 jeep Wrangler 3.8
1995 trans Am ls1
2011 volt
that is not completely accurate. if its on that list does not mean it can be tuned properly. I have and 04 ram hemi ... doesn't read knock, no injector info, no transmission support. I'm not sure its really doing anything. I added 20 degrees to all charts in an effort to go beyond the threshold of the motor I drove it for 2 days and wasn't even sure if it ran different. I have had disputes with them but my transmission is NOT even on the list. so basically I bought something useless. I guess I could buy a whole different vehicle, oh wait that would completely defeat the purpose of buying the tuner at all
I have a 2010 5.7 hemi and the only option I see in the transmission tab is what transmission I'm using. Am I missing something?
I downloaded the newest version of hp tuners from website. I'm using VCM editor 3.6.15. I will go try to re-read vehicle
Any possible Jeep Renegade support? It has that Fiat 1.4t junk, obviously the ve tables are pretty junky, as you can feel rich lean oscillation at part throttle and low boost level. I would really like to clean that up
'04 Ram 5.7L 545-RFE torque converter control please.
We have 06 PT cruiser With turbo motor. Hp will not read. Its says 205 to 07 on products I thought.
What error message are you getting?