LS2 & ID1000cc

[Turbojunky]

I am looking for some injector tuning help. Motor is stock LS2 and will be running injector dynamics 1000cc. I'm sure its been discussed here before but I can only input 63.5lb in the IFR table. What other tables need to be changed for injectors that are larger than 63.5lbs?

[schpenxel]

Double stoich AFR table to 29.xx

Cut the injector flow rate provided by ID in half

Cut the IVT term tables in half (engine-->fuel-->general, "IVT Terms", AFR Term and AFR^2 Term)

And obviously apply the rest of the ID data for short pulse adder and offset table

And you're done.