Ok, so just installed heads, cams and lth, and didn't have enough time to install the new 3800 converter so I'm forced to run around a few more weeks on the stock converter (6l80e 2011 camaro ss A6) what settings do I play with in the trans section to achieve less push at lights and stop signs? Any info will be helpful? Btw, I have heard of many people running the cam I have on stock converter with little to no push.
Try lowering your idle 100 rpm.
2023 Ford Maverick 2.0T AWD
torque management and overall airflow/timing will help alot
Follow @MASTUNING visit www.mastuned.com
Remote Tuning [email protected]
Contact/Whatsapp +966555366161
What's your idle set to? As noted above, Idle Speed and Base Running Airflow will have the largest effect on push.
Just did a cammed TBSS yesterday that had a lot of push, lowered idle to ~750rpm and some fine tuning to the base airflow table
Reply With Quote