well got injectors in and added pcv system now right and left banks ltft dont match at idle off by 6 to 10? also aint sure bout this pcv system yall got any suggestions
well got injectors in and added pcv system now right and left banks ltft dont match at idle off by 6 to 10? also aint sure bout this pcv system yall got any suggestions
Catch can system?
Venting to atmosphere as in breather filter? If so that's why your running lean now - breather has created a vacuum leak via letting more air into the crankcase during normal operation - just correct via MAF calibration and add a touch to the VE table to compensate...
2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80
~Greg Huggins~
Remote Tuning Available at gh[email protected]
Mobile Tuning Available for North Georgia and WNC
]alright buddy I'm back , the owner of the shop went on a vacation so I had to work the office but he is back and I dug out the dyno , so I'm ready to get back after it. should my stoich a/f ratio should be the same number for the whole table?? and us the pe multiplyer to get down to 12 to 1 or so at wot???
seems very fat
Last edited by jessiewalls; 07-12-2016 at 05:31 PM.
and I think I'm gonna need that ls3 maf and since I'm using my dyno I need to set a rev limiter of some sort any recommendations?
Last edited by jessiewalls; 07-12-2016 at 08:30 PM.
and I caint get my wot af error graph to populate
Post log/layout
Your air/fuel ratio commanded channel isn't logging for some reason? It's just blank... I'd try deleting and re-adding that one to the channels list
nope still blank
well shit how does that happen it was there and now its gone?
Not sure
i sent somethin to hp support maybe they know
but i need that channel fer wot tuning
Or you can set your WB up as lambda and use EQ error instead
not sure i know that way
think im gonna start a new thread this one to long
You can, but the problem is we ask you to try something or to post something and instead get 10 posts that are totally out in left field of things being done that we know aren't likely to help. That makes it tough to help.
Post a log and tune if you want help
VCM Suite V3+ GETTING STARTED THREADS / HOW TO's
Tuner by night
CPX Tuning
2005 Corvette, M6
ECS 1500 Supercharger
AlkyControl Meth, Monster LT1-S Twin, NT05R's
ID1000's, 220/240, .598/.598, 118 from Cam Motion
2007 Escalade, A6
Stock