Results 1 to 7 of 7

Thread: 2016 F150 3.5 Ecoboost Fuel Limitations

  1. #1
    Advanced Tuner LastPlace's Avatar
    Join Date
    Jul 2016
    Posts
    613

    2016 F150 3.5 Ecoboost Fuel Limitations

    2016 F150 3.5 Ecoboost Fuel Limitations, Who has run into them and what is it? injectors or fuel pump?

  2. #2
    Should be the same injectors as the 2013-2014 (maybe even 11-12') which are the limitation. Most have been able to run e85 on stock tune but once the wick is turned up there's no room left. There's a company that's supposed to have released 30% over injectors but I don't know a whole lot about those.

  3. #3
    Advanced Tuner LastPlace's Avatar
    Join Date
    Jul 2016
    Posts
    613
    So you will run out of injector duty cycle first?

  4. #4
    Quote Originally Posted by LastPlace View Post
    So you will run out of injector duty cycle first?
    From what I'm told by 2 tuners, yes. I'm working on a 16' truck and haven't found the limit yet, running into what seems to be missing tables to able to push the boost up high enough.

  5. #5
    Advanced Tuner LastPlace's Avatar
    Join Date
    Jul 2016
    Posts
    613
    Quote Originally Posted by mechanicboy View Post
    Should be the same injectors as the 2013-2014 (maybe even 11-12') which are the limitation. Most have been able to run e85 on stock tune but once the wick is turned up there's no room left. There's a company that's supposed to have released 30% over injectors but I don't know a whole lot about those.
    Are you referring to these?

    http://www.deatschwerks.com/products...jectors-detail

  6. #6
    Quote Originally Posted by LastPlace View Post
    I believe those to be the ones I'm referring to.

  7. #7
    Advanced Tuner LastPlace's Avatar
    Join Date
    Jul 2016
    Posts
    613
    Screenshot (1).pngScreenshot (2).pngScreenshot (3).pngScreenshot (4).png
    This is the injector data for SCT from Deatchwerks website.
    Looks like HPtuners has spots for 9 of the 10 listed.
    Not sure if you would hand blend to get as close or if you change the pressure scale to match.