Has anyone had the factory calibration updated by their dealer on a C7 Z06 ?
Has anyone had the factory calibration updated by their dealer on a C7 Z06 ?
which one? has there been a new one in the last month or so?
Higgs
Allow me to be more specific. I am dealing with 2016 Z06 with a Nov 2015 production date was interested if GM had flash updates for this vehicle ?
Thanks
Go to https://tis2web.service.gm.com/tis2web and type in the VIN and it will show the latest available calibration(s) for that vehicle.
Thanks Yonson
yes there are some updates for a car produced in November if it hasn't already been done.
TCM flash, infotainment, remote start cooled seat update, etc. I don't think there is a new ECM flash though.
Yes there are ... Are you getting the P16F3 code ?
No code
I was considering bringing the car in for the latest ECM update if any where available or necessary. After using the service link provided by Yonson I have discovered several updates are available.
if there are updates, how would you go about getting them?
thx
2003 MY Z06 3.3 liter whipple ...sold at around 1000 rwhp
wip 2015 Silverado w/2.9 Whipple (phase 1 completed) phase 2 in the works
We update every car we work on before we calibrate it. Especially the cars equipped with 8 speed auto's. GM has several updates for 2014-2015 and most of 2016.
Full Service GM Late Model Performance Facility
www.redline-motorsports.net
Follow US on FACEBOOK!
Follow us on Instagram! redline_motorsports
Thanks Redline that is great.
What does it take to update the GM calibrations, other than going to Stealership and getting raked over the coals, etc.?
Thx
All you need (besides a laptop and internet connection) is a compatible J2534 tool and an active TIS subscription. They offer multiple different subscriptions ranging from 2-3 days, monthly, and yearly depending on how often you plan on using it.
You should be able to find everything you need here:
http://www.acdelcotechconnect.com/sh...ogram/tis2web/
Cool
I had no idea that was available.
Thanks
It looks like $1395 is the lowest package needed to do programming. I'm I assuming correctly? Any recommendation for a J2534?
Thx
SPS is what you need for programming, you can get the 2 day license for $55. I use a Cardaq or McS1.
Awesome. Thanks! A question regarding flash/OE Warranty, etc.
If OEM warranty is a concern, and a tune voids said warranty, is there a flag set in the ECM making this apparent? Is there any way for it to be traced if flashed back to stock tune?
Thx