Looking for help

[JamieHRS]

I have the Pro version and want to hook in my PLX m-300 to it. Which ports do i use from the green box? I have a white wire wideband linear output, and a grey wire narrow band output.

[Trent_Petersen]

This thread will walk through the software part http://www.hptuners.com/forum/showth...PRO-Interface)

[schpenxel]

I have the Pro version and want to hook in my PLX m-300 to it. Which ports do i use from the green box? I have a white wire wideband linear output, and a grey wire narrow band output.

White wire goes to the input 1 connection from the picture above.

Also it's not a bad idea to run a ground from the ground connection on the HPT box to wherever the wideband is grounded.