When can we expect support for 2016 Camaro V6?
When can we expect support for 2016 Camaro V6?
post a picture of the service sticker on the ecm.
The info we have says it should be E80/E80A but one of our customers says it should be E82 so we need to confirm what ecm it has for starters
You can open a support ticket here https://support.hptuners.com/
I'll have him bring it to me when available.
Last edited by APS; 09-24-2016 at 04:33 PM.
Its a E82.
Looks like EFI Live supports this controller. Hopefully the hptuner guys can get this one unlocked soon but maybe there is not much demand. I would like to swap this engine but will need VATS disabled.
I recommend reading it for startersOriginally Posted by vannatta20
You can open a support ticket here https://support.hptuners.com/
ding!i recommend reading it for starters
is it possible to read/write the 2016 Camaro V6 now?
Yes, 3.4/3.5 is required and you have to e-mail support an infolog taken with the vehicle connected.
At the time I posted that the VCM scanner couldn't connect. I couldn't read the ECU as well. I will try again.
Looking at 2019 Chevy Blazer - not listed in supported vehicles. Looks like LGX engine w/ E82 - should I even try to read the ECU? Any guess on possibility of swapping in parts of tune from one of the supported LGX vehicles w/ 335hp?
LGX Applications.PNG
Reply With Quote