Hey all, finally got to do some logging with my 2008 F250 6.4 Powerstroke at the track. I've got almost everything setup like I want, but have a few items missing(or I cant find them).
Exhaust gas temperature. I see 3 listed, none are right. The 6.4 has 4 from the factory I believe, but 3 of them usually fall off and we monitor the one in the up-pipe. It displays on my H&S.
MAP/Boost. I have both Intake manifold absolute and Manifold Absolute pressure selected. I thought they were correct because they went up as I built boost, but now looking at the logs they max at 37psi and never go up. Both dash Gauge and my H&S show correct PSI around 52-58. Should I use another parameter?
Transmission gear. I cant find it, if its not there, can we have it added?
Main Inj Timing. I have it and it displays, but i'm not familiar with how it is displaying. My H&S will read -18 timing, which is what I expect, but HPT shows for example -39*. How should I interpret this?
Thanks!
P.S., I was logging and configuring with 3.0. I noticed when I got home there was a 3.2 released and I updated it. If some of these were addressed in 3.2, then please disregard!