Results 1 to 5 of 5

Thread: 2008 LMM Data Logging

  1. 12-07-2016 #1
    Steve Ford
    Steve Ford is offline
    Potential Tuner
    Join Date
    Jun 2016
    Posts
    2

    2008 LMM Data Logging

    Is there nothing for these LMM data logging wise for parameters to watch beside a few? I can see rail pressure but no desired rail pressure. No pulse width, injection timing, ect...
    Am I missing something?? Coming from EFI Live it seems like there isn't much??? Thanks!
    Reply With Quote Reply With Quote
  2. 12-08-2016 #2
    juicedimpss
    juicedimpss is offline
    Tuner in Training
    Join Date
    Dec 2007
    Posts
    14
    have you tried adding channels to your configuration?
    Reply With Quote Reply With Quote
  3. 12-08-2016 #3
    Steve Ford
    Steve Ford is offline
    Potential Tuner
    Join Date
    Jun 2016
    Posts
    2
    Yes. There wasn't anything to add that I seen. At least what I wanted to log.
    Reply With Quote Reply With Quote
  4. 12-08-2016 #4
    juicedimpss
    juicedimpss is offline
    Tuner in Training
    Join Date
    Dec 2007
    Posts
    14
    i loaded the wrong config file earlier, this should work better
    Attached Files Attached Files
    Reply With Quote Reply With Quote
  5. 12-09-2016 #5
    juicedimpss
    juicedimpss is offline
    Tuner in Training
    Join Date
    Dec 2007
    Posts
    14
    maxlogging.png
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »