Results 1 to 7 of 7

Thread: nGauge Data in Charts & Histograms?

  1. #1
    Advanced Tuner
    Join Date
    Dec 2005
    Posts
    222

    nGauge Data in Charts & Histograms?

    How do I select data from an nGauge log in the Charts and Histograms? When the file is opened, the channels of data come up but I'm not able to get those same channels over into the Charts and Histograms; they don't appear as selections when setting up either.
    Jeff Chambers, Owner
    CRT Performance, LLC
    349 Cleveland Road
    Norwalk, OH 44857
    Ph: 419-668-4151
    Fx: 419-668-4643

    Performance Parts, Service and Dyno Tuning Specialists

  2. #2
    HP Tuners Owner Keith@HPTuners's Avatar
    Join Date
    Sep 2002
    Location
    Chicago, IL
    Posts
    6,399
    Not all channels in csv files are mapped to HPT parameters yet.

    This is something we're working on.
    We got this guy Not Sure, ...

  3. #3
    Potential Tuner
    Join Date
    Dec 2016
    Posts
    2
    In the mean time do we just need to use another log viewer?

  4. #4
    Instead of having them pre-mapped, how about allowing the user to perform the mapping themselves?

    Something like being able to assign a csv file channel to a parameter or simply having parameters that automatically populate from the csv based on the top row in the csv file.

    Basically, I want to be able to assign the channel from my csv to any gauge.
    2013 Mustang GT - Twin Turbo
    2016 Mustang GT
    2011 Suburban Z71 - Tow Machine

  5. #5
    Tuner
    Join Date
    Sep 2014
    Location
    N/A
    Posts
    87
    Any progress on this request would be greatly appreciated! I like Dan Stewart's idea of being able to allow the user to map from the channel list. Out of the 23 channels logged on my 2010 GT500 with my nGauge only 4 automatically mapped into charts
    Last edited by Yagermeister; 08-10-2017 at 09:43 PM.

  6. #6
    Dare I say it on here but the SCT log viewer works great for viewing these.

  7. #7
    Advanced Tuner
    Join Date
    Feb 2017
    Location
    TX
    Posts
    760
    Are we able to log maf period with the NGauge? I can only find volts for 2014 GT.