Does anyone have calibration info on the White Bosch 36lb injectors? Or know where to find it? Thanks in advance
Does anyone have calibration info on the White Bosch 36lb injectors? Or know where to find it? Thanks in advance
Search by Bosch part number in this forum and you should find what you're after as there are more the one Bosch 36lb factory injector.
Here is some data I had in my library.....no guarantees
Ed M
2004 Vette Coupe, LS2, MN6, Vararam, ARH/CATs, Ti's, 4:10, Trickflow 215, 30# SVO, Vette Doctors Cam, Fast 90/90, DD McLeod, DTE Brace, Hurst shifter, Bilsteins etc. 480/430
ERM Performance Tuning -- Interactive Learning ..from tuning software training to custom tunes
HP Tuners Dealer- VCM Suite (free 2hr training session with purchase), credits and new Version 2.0 turtorial available
http://www.ermperformancetuning.com
http://www.facebook.com/ERMPerformanceTuning
[email protected]
Thanks mowton, I'll check it out and see how it goes.
I found the data in the old thread but didn't work very well was super rich and ve table were in the teens to get to lambda 1 even with inj pulse backed off and transient fuel set at .28