Results 1 to 5 of 5

Thread: How to copy a e67 and put on another ?

  1. #1
    Potential Tuner
    Join Date
    Jan 2017
    Posts
    3

    How to copy a e67 and put on another ?

    Could somebody tell me step by step how to copy the e67 and put tuNE in another ? I have a stand alone harness if it matters . Thanks !

  2. #2
    Tuner in Training
    Join Date
    Aug 2012
    Posts
    40
    Get another E67 with the same service number. Such out the cal you want to replicate with efilive or hp tuners. license new ecu, and load cal into the second ecu. Steve

  3. #3
    Advanced Tuner
    Join Date
    May 2006
    Location
    Seattle, WA
    Posts
    539
    Worst case you'll need to flash it via GM SPS using a Tech II, Drewtech Mongoose, or similar J2534 device. The cal-flash your stuff over using HPT.
    ~Erik~
    2013 Sonic RS - manual, CGM, 6M, sunroof, mods in process
    2008 TrailBlazer 3SS AWD LS2, loaded, dropped, modded, SE22 Performance tuned. And then some...
    2002 TrailBlazer LT 4WD 4.2L I6, lifted, tires, exhaust, SE22 Performance tuned

  4. #4
    Senior Tuner DSteck's Avatar
    Join Date
    Mar 2008
    Location
    St. Louis, MO
    Posts
    4,863
    I can do it (but not free).

    DSX Tuning - Authorized HP Tuners Dealer
    http://www.dsxtuning.com
    http://www.facebook.com/dsx.tuning
    Just say no to bull s***.
    IF YOU WANT HELP, POST A FILE!

  5. #5
    Potential Tuner
    Join Date
    Jan 2017
    Posts
    3
    Thanks guys , I have a e67 from a 07 solstice and one from a 06 ion with the same service number . I did a compare and copy all difference's and the new ecm is not correct it idles high . Any clue what I'm missing ? I noticed one ecm has cold start screen and the other does not ..... thanks for any help !