SD Tuning VVE help on 2014 5.3 Silverado

[tank3id]

? on what sensor I should be logging for my row axis. VVE table has MAP/BARO (Pressure Ration) on the row axis.

[tank3id]

Log Attached.

[tank3id]

Intake Manifold Absolute Pressure sensor will only populate the 0.93 row.

[schpenxel]

Post tune and your layout

Working fine for me

[tank3id]

Tune file.

[tank3id]

Volumetric Efficiency Airflow selected For Row an only Populating row 0.15

[tank3id]

Heres the Layout

[schpenxel]

All of these graphs are wrong for that tune

[tank3id]

From what ive read there is supposed to be a MAP/BARO (pressure ratio)math function available but I haven't seen it any where in my channels.

[schpenxel]

I fixed the few that were there and deleted the ones like O2 voltages that aren't going to be much use anyways. This should show you how it works at least

SD LAYOUT.Layout.xml

[schpenxel]

From what ive read there is supposed to be a MAP/BARO (pressure ratio)math function available but I haven't seen it any where in my channels.

It's not a channel, it's a math parameter. Just search for it in the parameter selector and it will come up. I've used it in the layout I posted so you can see how it works

[tank3id]

Yes I miss spoke saying channel. I see you have it just as pressure ratio math.

[tank3id]

Thanks for the help