Move to cell in RTT

[VYSSLS1]

Hi Guys,

just a small thing that will make life a lot eaiser when in RTT,

90% of the aftermarket stuff i tune when in the ve table pressing space bar will take you to the active cell, making things a lot quicker to move around and get the tune done,

any chance this can be added in a update?

Thanks
Dale

[MeentSS02]

When I was RTT'ing my VE table this weekend, it highlighted the active RAM cell as you were logging data in your standard AFR % Error histogram

[Keith@HPTuners]

it highlights it but doesn't put it in focus.

I don't think we can do it though as I believe the enter key takes your current cell in focus and puts it into a data entry state. Only one action for the enter key can exist at any given time.

[VYSSLS1]

Keith,

can you set Space bar to do it??

[Keith@HPTuners]

Space bar is the scan start/stop key.

Maybe the tab key.. have to look into it after a few other things are completed.

[VYSSLS1]

awesome thanks mate!!

keep up the good work!!

[sikhabib]

it highlights it but doesn't put it in focus.

I don't think we can do it though as I believe the enter key takes your current cell in focus and puts it into a data entry state. Only one action for the enter key can exist at any given time.

instead of putting cells into data entry mode, is it posible to be able to just press the + or - button and have it alter the highlighted cell that the ve table is using
Sort of what its like now but the + and - keys affect the cell in use