I have been reading a lot on tuning with HP tuners over the past couple years and finally decided to go about it the right way and bought the ERM tuning class. I am about half the way through and its cleared up a lot of confusions i had with the different tables and how everything works together.
I started trying different layouts the other day on my scanner and this morning logged a MAF only with DFCO disabled. Can someone take a look at my logged file and my layout and give me any suggestions that I may be missing that will help me out in the long run? I also noted my EQ error table wasn't reading anything. If anyone has an idea why that would be great.
I know on my LTFT+STFT i didn't put any filters for this mornings log but i wanted to verify the table would be reading and picking up measurements correctly. I read in the training class I could apply filters after the log was recorded and it would clean it up.
Reply With Quote