Having a new issue today. VCM Scanner is operating very slowly and not showing all the channels I have listed.. I'm using the same config file I've used for a few cars without issue. I did all the normal reboot operations, updated the software, ect. Nothing has an effect. Car is a 2013 mustang which I have tuned several times (my personal car). I am still able to flash the ecu in the normal amount of time. What should I try next? i'll attach the config file.
Ford.Channels.xml
Go to HP Tuners support and request beta - it has the scanner problems fixed or at least should be...
2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80
~Greg Huggins~
Remote Tuning Available at gh[email protected]
Mobile Tuning Available for North Georgia and WNC
Got the beta today, no change.
hooked up to a 2015 car at work, everything works fine.
Reply With Quote