Results 1 to 10 of 10

Thread: 16 camaro, paxton startup tune

  1. #1
    Tuner in Training
    Join Date
    May 2017
    Posts
    14

    16 camaro, paxton startup tune

    Hey fellas i just completed my ecs/paxton install and have a few scans if anybody wants to give me any constructive input. I am new to hptuners as i have only used XFI stuff on my hotrods.
    Attached Files Attached Files

  2. #2
    Tuner JnJSpdShop's Avatar
    Join Date
    Aug 2005
    Location
    Western New York
    Posts
    197
    Post your tune

    Western New York's Performance Headquarters

    716.830.0506




  3. #3
    Tuner in Training
    Join Date
    May 2017
    Posts
    14
    Here you go, thanks
    Attached Files Attached Files

  4. #4
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    ^ is this a canned tune???
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161

  5. #5
    Tuner in Training
    Join Date
    May 2017
    Posts
    14
    It's from ecs.

  6. #6
    Tuner in Training
    Join Date
    May 2017
    Posts
    14
    Any input?

  7. #7
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    will check
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161

  8. #8
    It doesn't look like the throttle is opening fully under WOT. I see 99% on the Accelerator pedal, but only 70% on the Throttle. Try increasing the PR limit in the ETC tab from 0.9 to 1.0. Also, do you have the stock file to compare to?

  9. #9
    Tuner in Training
    Join Date
    May 2017
    Posts
    14
    Yes I have stock original tune file, its .9 in both tunes. I see what your referring to I was at 99% pedal for over 3 seconds and only reached 70% throttle. Can I get an explanation of what the PR pressure ratio max parameter does?
    Last edited by tom j; 05-16-2017 at 07:23 PM.

  10. #10
    Tuner in Training
    Join Date
    May 2017
    Posts
    14
    Anybody?