My calculus is rusty, but I understand. Thanks for the clarification. I always appreciate your comments.
After messing around with the worksheet a bit, and real scanner info, I need to make significant changes to the boundary. It will be quite close to the oe settings, but with the rpm table zeroed out.
One more question though. What injector pw lengths are best to use in the 1500-2500 rpm range? WOT, moderate speed increase, or just cruise? At cruise, pw is .7 - 1.3. Moderate acceleration is 2-4, and wot at all rpm range is 6.2 - 7.4.