Dumb newbie question.
Dumb newbie question.
Last edited by MarcusMilner; 05-01-2019 at 03:01 PM. Reason: because I wanted to.
That's not what it says at all.
Persistence is the key to success
Ok, it won't read it. What is it saying?
Last edited by MarcusMilner; 06-19-2017 at 01:45 AM.
Try not reading it in high speed mode. Check for power at the OBD 2 port, if you have an aftermarket radio remove the radio fuse and try reading it again.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
Ok, I'll try reading it that way, I've run several scans just fine so I don't think power is a issue at the port, and it's the stock radio. Thank you for a real reply, I appreciate it. MM
Tried reading it again, failed again and got the reduced power message on the dic while it was reading.
~Erik~
2013 Sonic RS - manual, CGM, 6M, sunroof, mods in process
2008 TrailBlazer 3SS AWD LS2, loaded, dropped, modded, SE22 Performance tuned. And then some...
2002 TrailBlazer LT 4WD 4.2L I6, lifted, tires, exhaust, SE22 Performance tuned
What version of VCM Editor are you using?
We got this guy Not Sure, ...
no, just got it Friday.
Keith, it's 3.6, I have a ticket number, 87354. Could you look at it please?
I'll go out and try this, thanks, MM
Eric, you are the man, thank you!!! MM
~Erik~
2013 Sonic RS - manual, CGM, 6M, sunroof, mods in process
2008 TrailBlazer 3SS AWD LS2, loaded, dropped, modded, SE22 Performance tuned. And then some...
2002 TrailBlazer LT 4WD 4.2L I6, lifted, tires, exhaust, SE22 Performance tuned
Yes, I wrote it and saved it.